Analysis of common failures of belt filter press and solutions

     1 Malfunction: The roller cannot be rotated.
Reason: The bearing is damaged.
Solution: Replace the bearing.

2 Failure: The filter cake has a high moisture content.
Reason: Insufficient flocculation, or insufficient strain on the strainer, fast speed of the filter press, or unclean cleaning of the strainer.
Solution: Adjust the mixing ratio of sludge and chemical solution, adjust the strainer tension and main drive speed, and check the cleaning device.

3 Failure: Mud leakage on both sides of the extrusion section.
Reason: The feed volume is too large, or the flocculation effect is not good, or the water permeability of the filter is not timely enough.
Solution: Adjust the sludge valve switch, adjust the flocculation effect and flocculation liquid concentration, and check whether the cleaning device is working properly.

4 Failure: Too much suspended solids in press filtrate or cleaning water.
Reason: The permeable gap of the filter is too large or the flocculation is insufficient.
Solution: Replace the filter, check whether the flocculant is selected properly, and whether the dissolved concentration is too high or low.

5 Fault: The filter is not cleaned.
Reason: The nozzle is blocked, or the water pressure is not enough, or the flocculation effect is not good.
Solution: Dredge the nozzle, replace the cleaning water pump, and check the flocculation effect.

6 Poor sludge flocculation effect.
Reason: The mixing ratio of sludge and flocculent fluid is incorrect, the flocculating fluid concentration is too low, and the sludge concentration is too high.
Solution: Check the concentration of the flocculant, adjust the dosage, and change the variety and quality of the flocculant.

    Doyen specializes in providing belt press equipment for the Southeast Asian market. Welcome to visit our workshop and formulate a more scientific  plan based on the actual situation of your company. Welcome to visit joyce@doyenchina.com or visit https://www.doyenchina.com.