Why does the filter chamber of the chamber diaphragm filter press leak? What is the solution?

      When the edge of the chamber diaphragm filter press is damaged, even if one side is slightly convex, even if one side is often worn, it will come into contact with other filter plates. Regardless of the pressure, the filter chamber will penetrate. In this case, we judge from the leakage point that the penetration of the filter plate is usually very large, and it can even be sprayed.

　　The filter cloth of the chamber diaphragm filter press is not placed correctly. There are many reasons why the filter chamber cannot be sealed. We need to start with a simple filter chamber to see if the filter cloth has folds or the edges of the filter cloth are defective. Since the structure of the filter chamber is located between the filter plate and the filter cloth and bears great pressure, the filter plate is usually not prone to problems, and the rest is the filter cloth. A seal is formed between the rigid filter plates to play a key role in the filter cloth. Wrinkles or defects on the natural filter cloth may cause gaps between the filter plates, and the natural filter will not form a seal.
The pressure of the chamber diaphragm filter press is insufficient. The filter plate and filter cloth need to withstand strong pressure to achieve a closed filter chamber structure. When the pressure is insufficient, the pressure applied to the filter plate is less than the pressure of the filtrate. Of course, the filtrate naturally penetrates the gap.

　　 Chamber diaphragm filter press has high efficiency, low energy consumption, dehydration, simple structure, convenient maintenance, low noise, stable operation and reliable continuous production. It is widely used in petroleum, chemical, coal, metallurgy, building materials and textiles. Environmental protection project of solid-liquid separation of food and water.
When the hydraulic system of the chamber membrane filter press works for a long time, the fatigue performance of the chamber membrane filter press is as follows: First, the temperature of the chamber membrane filter press is too high and generates heat. Too high Second, the strength of the chamber membrane filter press is insufficient. If the temperature is too high, we can consider replacing the high-temperature hydraulic oil in the plate and frame filter with new hydraulic oil, which can quickly reduce the temperature of the chamber diaphragm filter press. If the movement of the chamber membrane filter press is not firm, it needs to be closed and rested for a period of time. This is a way to extend the life of the machine.
The entire chamber diaphragm filter press relies on the hydraulic system to provide strong power, and the entire frame filter press is inseparable from the hydraulic system. Including the squeeze of the filter plate, the backward pulling of the push plate, the operation estimation of the push plate trolley, etc., which are inseparable from the hydraulic system. Therefore, the frequency that the chamber membrane filter press system is applied to the entire equipment is very high, which is a particularly exhausted part of the chamber membrane filter press. Keep the chamber diaphragm filter press still to improve work efficiency.

      Doyen specializes in providing belt press equipment for the Southeast Asian market. Welcome to visit our workshop and formulate a more scientific  plan based on the actual situation of your company. Welcome to visit joyce@doyenchina.com or visit https://www.doyenchina.com.