15 years focus on the development and production of slurry filters and wastewater treatment
Tel:
+86-757-8633-0278
Email:doyen@doyenchina.com
Fax:+86-757-86287390
Address:Room 201, Building No. 24, Yicui Rose Garden, No. 2, Jihua 7 Road, Chancheng District, Foshan City, Guangdong Province, China 528000.
After running for a period of time, the flushing water needle of the belt filter press is blocked. When the flushing water needle is clogged, it is the main reason that the belt filter press produces poor results and runs mud. Solve the blockage of flushing water needle: (1) Remo...
May-09-2021
Several maintenance points of belt filter press: Enough flushing time of the belt filter press should be ensured every day. When the belt filter press is shut down, the inside (filter) and the whole body of the machine should be rinsed to ensure cleanliness and reduce sludge corrosion. Oth...
May-06-2021
How to get out of the sales dilemma of belt filter press： Domestic pollution control equipment includes belt filter presses and other sludge treatment equipment. Where are the major problems and what are the difficulties we need to face now, and what is the investment of small and medium p...
May-04-2021
Sludge is an inevitable product of sewage treatment in sewage treatment plants and sewage stations. After the sludge that has not been properly treated and disposed of enters the environment, it directly brings secondary pollution to the water body and the atmosphere, and poses a serious th...
May-02-2021
Analyze the selection guide of belt filter press: The temperature and viscosity, physical and chemical characteristics of the material in the filtering state, the processing capacity per unit time, the moisture content of the filter cake, the solid content in the filtrate, the degree of was...
Apr-30-2021
How to solve the problem of thin mud cake pressed by belt filter press and high moisture content. The pressed mud cake is thin and the water content is high, which can be attributed to the belt filter press not being able to press the mud, which can be described as the following: Mud runs a...
Apr-28-2021
How to operate the filter press： Steps: First step compaction: Check the whole machine before operation of the filter press: check whether the filter cloth is discounted or overlapped, and whether the power supply is properly connected. After checking, the pressing operation can be carried...
Apr-26-2021
Analysis of common failures of belt filter press and solutions: Malfunction: The roller can’t rotate. Reason: The bearing is damaged. Solution: Replace the bearing. Failure: The filter cake has a high moisture content. Reason: Insufficient flocculation, or insufficient strain on t...
Apr-26-2021
The belt filter press is a biological solid/sludge dewatering equipment for all kinds of sludge and slurry which is sandwiched between two tight belts for dewatering and under the mechanical pressure through the serpentine rollers of decreasing diameter. This machine can actually be divided...
Apr-22-2021
Talking about the knowledge of belt filter press what principles are needed to match the filter cloth of the frame filter press. This article is organized and released by the belt filter press. If you feel this article is good, please reprint it, and tell your friends by the way! Thank you ...
Apr-14-2021
Talking about the knowledge of belt filter press about the floatation and separation process of air-carrying flocculant in the air flotation machine of sewage treatment equipment. This article is organized and released by the belt filter press. If you feel this article is good, please repri...
Apr-11-2021
The correct operation of the belt filter press can make it more performant. The blog post on the belt filter press website is here to share with you；for the belt filter, the correct operation method can prolong its service life and give more play to its performance. The belt filter is equi...
Apr-09-2021
+86-757-8633-0278
doyen@doyenchina.com
Sitemap
