15 years focus on the development and production of slurry filters and wastewater treatment
Tel:
+86-757-8633-0278
Email:doyen@doyenchina.com
Fax:+86-757-86287390
Address:Room 201, Building No. 24, Yicui Rose Garden, No. 2, Jihua 7 Road, Chancheng District, Foshan City, Guangdong Province, China 528000.
The purpose of sludge conditioning is to pretreat sludge to improve the efficiency of sludge concentration and dehydration, and to improve the properties of sludge in a planned way for economic subsequent treatment.Organic sludge (including primary settling sludge, humus sludge, activated s...
Feb-28-2021
Installation and debugging of plate and frame filter press According to the size of the foot provided by the supplier, the embedded hole is designed and the two-time grouting method is adopted. Enough space should be left around the filter press for easy operation and maintenance. The filt...
Feb-28-2021
The belt filter press is blocked after running for a period of time When the washing water needle is blocked, it is the main reason for the poor effect and mud running of the belt filter press. Solve the flush needle blockage: (1) Remove the needle cleaning head and remove the slag cleaning...
Feb-28-2021
Where is the buried sewage treatment equipment often used 1, factory sewage treatment, mine sewage treatment, military sewage treatment, school canteen sewage treatment, tourist spots sewage treatment, highway service area toll station sewage treatment, scenic area sewage treatment. 2,Hotel sewag...
Feb-25-2021
Talk about the sewage treatment equipment air floatation machine with air flocs floating separation process Sewage treatment equipment air floatation machine with air flocs in the contact room through the buoyancy, gravity and water resistance balance effect, achieved upward speed U.After e...
Feb-25-2021
In the long-term operation process, the sludge treatment system of belt filter press frequently occurs various failures, which affect the stable operation of the system. The most frequent fault occurs when the press cloth runs off track, which not only greatly reduces the operation effect, ...
Feb-23-2021
Heat drying is to first dehydrate the sludge with belt sludge dehydrator and use heat energy to dry the sludge.The sludge after drying is granular or powder, the volume is only 1/5~1/4 of the original, and by the moisture content below 10%, the microbial activity is inhibited to avoid the p...
Feb-22-2021
Share the knowledge of belt filter press with you to talk about the main methods of sludge concentration;Concentration is an economical and effective method to reduce the volume of sludge. The main dewatering object of sludge concentration is interstitial water. Sludge thickening includes g...
Feb-21-2021
Running speed of filter belt of belt filter press Under the premise of ensuring the safe and smooth transition of sludge from the gravity and wedge dewatering zone to the pressing zone (more than 80% free water is fully removed), appropriately increasing the running speed of the filter belt can...
Feb-20-2021
Precautions for Water Pump Operation in Sewage Treatment Station: Maintenance work is strictly prohibited when the equipment is in electrified operation. Do not close the water pump inlet valve, except for normal maintenance. No aerial work, repair of lighting fixtures or handling equipment shal...
Feb-19-2021
The belt filter press should be installed and debugged in accordance with the following six operating steps: 1,The filter press should be installed on a flat concrete foundation.Feed end push plate machine foot foot bolt fixed on the foundation.The bracket end does not need anchor bolts, or...
Feb-18-2021
Belt filter press knowledge about the commonly used sludge filtration and dehydration methods which are several; There are several commonly used sludge filtration and dewatering methods. (1) natural dehydration Including drying bed type and sand filter bed type. Dry bed type is the use of solar h...
Feb-17-2021
+86-757-8633-0278
doyen@doyenchina.com
Sitemap
