15 years focus on the development and production of slurry filters and wastewater treatment
Tel:
+86-757-8633-0278
Email:doyen@doyenchina.com
Fax:+86-757-86287390
Address:Room 201, Building No. 24, Yicui Rose Garden, No. 2, Jihua 7 Road, Chancheng District, Foshan City, Guangdong Province, China 528000.
Belt type filter press is also called the belt type sludge dewatering machine, because it can continuous operation, simple operation and management, complete equipment, thus make less investment, labor force, low energy consumption and maintenance costs, sludge dewatering, both at home and ...
Feb-04-2021
The belt filter press is a biosolid/sludge dewatering device for chemical air conditioning slurry which is clamped between two tensioning belts through which mechanical pressure is applied through serpentine diameter decreasing rollers. The unit can actually be divided into three zones: t...
Feb-03-2021
Pig farms have high feeding technology, unified management, reduce the cost, improve economic benefits, but due to a large number of concentrated fecal sewage discharge caused by environmental problems are becoming more and more serious, causing a great impact on the environmental quality. ...
Feb-02-2021
Operation steps: The first step of pressing: the whole machine should be checked before operation of the filter press: check whether the press cloth is discounted or overlapped, and whether the power supply is normally connected. First press the “start” button, the oil pump star...
Feb-01-2021
The main reason is that the belt type sludge press filter can not press the mud and the concentration of the mud is low. Sludge concentration, often called sludge solids content, sludge solids content is less than 1%, direct mechanical sludge dewatering effect is not ideal, and the need for...
Jan-31-2021
Comparison of Shallow Air Flotation and Traditional Air Flotation Machines. In the traditional air flotation device, the depth of the pool is generally 2.0 ~ 2.5m, because the equipment is stationary and the water is moving. When the water enters the contact area from the reaction chamber, the fl...
Jan-30-2021
The main reason is that the belt type sludge press filter can not press the mud and the concentration of the mud is low. Sludge concentration, often called sludge solids content, sludge solids content is less than 1%, direct mechanical sludge dewatering effect is not ideal, and the need for flocc...
Jan-29-2021
1, the frame: the frame is the base parts of the filter press, both ends are thrust plate and pressing head, the two sides of the girder will be connected and persistent, the girder is used to support the filter plate, filter frame and pressing plate. The frame needs to be covered with stai...
Jan-28-2021
Filtration mode: the way of filtrate outflow is clear flow filtration and undercurrent filtration. Open-flow filtration: A water nozzle is installed on the lower outlet hole of each filter plate, and the filtrate flows directly out of the water nozzle. Undercurrent filtration: a liquid out...
Jan-27-2021
The thin mud cake and high moisture content can be attributed to the fact that the belt filter press cannot press the mud, which can be described as the following: When the belt filter press works, it runs mud and leaks mud. The sludge efficiency is low, the sludge cake is thin, and the pro...
Jan-25-2021
The following operating rules of belt filter press are some common sense of operation summarized by our company’s after-sales debugging personnel after many years of visits. 1.the staff must be familiar with the working principle and technical characteristics of the belt filter press, ...
Jan-25-2021
Due to various reasons, the filter cloth of the belt filter press needs to be repaired, and the replacement is time-consuming. Therefore, it is necessary to learn about the relevant belt filter press filter repair knowledge and skills: in order to prepare from time to time with the dehydrat...
Jan-24-2021
+86-757-8633-0278
doyen@doyenchina.com
Sitemap
