How to prevent rust maintenance of filter press

      For machinery and equipment, rust is a serious hazard to machinery. As long as it is a metal containing iron, the oxidation reaction of iron will occur in a humid environment with sufficient oxygen. This phenomenon is still quite threatening to filter press equipment working under extremely harsh conditions, even if all filter presses have been rust-proofed. In the damp working environment, the filter press will oxidize likewise. So on the filter press equipment, which parts need frequent anti-rust maintenance?

For the filter press, the most rusty part is the base of the filter press. In order to isolate other parts of the equipment from the ground, the filter press equipment supports the equipment in order to isolate other parts of the equipment from the ground and reduce the invasion of these parts. This ensures that most of the important parts of the equipment are as far away as possible from the damp environment, but it is always unable to Effectively protect the base. When the filter press is used in a humid environment for a period of time, the base will rust first ((because it has been in contact with the humid environment for a long time). Faced with this

environment, we can only take some measures The machine base is protected to delay its rust. The purpose of preventing the equipment from rust. Since the working environment of the filter press equipment must contain a large amount of water, it means that the equipment is inevitable in contact with water, and we need to clean it in time Drop the water in the base to reduce the rapid oxidation of the base due to prolonged exposure to water. The second part is the screw of the hydraulic device. We all know that when the equipment is working, the screw of the hydraulic device will The expansion and contraction keeps moving, this will cause this part of the Cheorwon to lose electrons and be in an unstable state. If the equipment is running, this phenomenon will not have any effect. Once the equipment stops, it is unstable. The iron atom is very easy to react with water molecules and oxygen atoms in the air, which means that the metal in this part is more prone to rust, so when we stop the filter press, we must add more lubricating oil. On these moving parts, keep them isolated from the air.
The third point is that we need to pay attention to some details. For example, we also need to add lubricating oil regularly for the chain of automatic pull plate. We also need to do some anti-rust treatment on the surface of the equipment regularly. Generally, the steel plate of the filter press is treated with anti-rust treatment and sprayed with anti-rust paint. For example, the anti-rust paint is scraped off during work or after a long period of oxidation. , We need to remedy the missing parts in time. The same is true for plunger pumps.
In fact, the other parts of the equipment were processed for anti-corruption during manufacture, so we only need to pay attention to these two parts.

      Doyen specializes in providing belt press equipment for the Southeast Asian market. Welcome to visit our workshop and formulate a more scientific  plan based on the actual situation of your company. Welcome to visit joyce@doyenchina.com or visit https://www.doyenchina.com.