How to solve the slow walking phenomenon of the filter plate of the belt filter press

      Slow walking on the filter plate of the belt filter press often occurs. I have tried different solutions before, but there has been no good progress. Today, let me share with you the methods with higher efficiency. In fact, this The method is simple:

The filter plate of the belt filter press walks slowly, or even slips off. It is mostly caused by oil stains and excessive stains on the guide rod. At this time, it is only necessary to clean the guide rod in time and apply butter to ensure its lubricity . Of course, one thing to note is that it is strictly forbidden to apply thin oil on the guide rod, because the thin oil is easy to fall and the bottom is very slippery. It is easy for personnel to fall over and cause personal injury accidents. It is sealed inside. At this time, as long as the system is exhausted, it can usually be solved quickly.

       Doyen specializes in providing belt press equipment for the Southeast Asian market. Welcome to visit our workshop and formulate a more scientific  plan based on the actual situation of your company. Welcome to visit joyce@doyenchina.com or visit https://www.doyenchina.com.