How to solve the uneven filter cake of the belt filter press

      There are many reasons for the uneven formation of the filter cake of the belt filter press, which may be caused by insufficient or too thin feed, or clogging. For these common failures of the plate and frame filter press, in addition to careful inspection, it is also necessary to accumulate experience in peacetime, so that we can deal with such problems freely.

The general solutions are mainly as follows: 1. Increase the feed to the filter press; 2. Adjust the process; 3. Improve the feed to the filter press; 4. Clean the filter cloth or replace the filter cloth; 5. Clean Blockage; 6. Clean the feed hole; 7. Clean the drain hole; 8. Clean or replace the filter cloth; 9. Increase the pressure or pump power; 10. Low pressure start and continuous pressure increase.

      Doyen specializes in providing belt press equipment for the Southeast Asian market. Welcome to visit our workshop and formulate a more scientific  plan based on the actual situation of your company. Welcome to visit joyce@doyenchina.com or visit https://www.doyenchina.com.