Tel:
+86-757-8633-0278
Email:doyen@doyenchina.com
Fax:+86-757-86287390
Address:Room 201, Building No. 24, Yicui Rose Garden, No. 2, Jihua 7 Road, Chancheng District, Foshan City, Guangdong Province, China 528000.
Integrated belt filter press for directly loaded into standard export container:Key advantages: Belt width: 1750mm, Capacity: 5-8 tons/hr, Total power: 17Kw Can be loaded into container directly, save transportation cost; Improved structure, can cut the maintenance cost for belts, bearings, and other wearing parts; Low cake moisture content, stable running; Good use but favourite price!
:
Key advantages:
Features and improved parts:
1.Integrated structure can save cost: With integrated frame structure, the whole machine can be loaded into a 20-feet container. Customers only need to assemble the main drive motor and the lower belt so then can be used directly. So it can minimize the cost of shipping and after-sales installation and commissioning;
2.Prolong the gear box lifetime and save the power consumption: Double-drive motors are used to adjust the frequency converter to realize the synchronous speed operation of the motor. The gearbox adopts a hard-toothed gearbox with high transmission efficiency and can withstand large torques. There will be no cycloidal needle jamming and the risk of oil leakage during deceleration so can extend the service life of the gearbox.
Double-drive motor synchronous drive structure: simplified the sprocket and the synchronous tooth structure for reducing the cost of replacement parts due to the poor sealing of these two parts and their insufficient lubrication;
Hard tooth surface motor: improving transmission efficiency, Save 15% of power consumption.
3.Reduce the material leakage situation: Add an extra set of dewatering roller in the squeezing part to enhance the pre-dewatering capacity of extrusion and reduce the occurrence of material leakage running due to insufficient pre-dewatering when entering to the high pressure zone;
4.Reduce the posibility of belt damage: The pressing part separates the extruded material and the pressing material at the same time, reduces the pulling force on the belt and minimizes the damage to the belt;
5.Cancel the cause of some wearing parts: The pre-dewatering section adopts the structure of roller-support-the-belts to prevent the cause of vulnerable parts such as the damage of belts or supporting bars;
6.Prolong the belt life time: This new type of machine adopts to use integrated bearing stand, and the sealing ring is changed to a multi-layer sealing structure, which reduces the problem of bearing damage due to water ingress in the bearings, effectively reduces 1/3 of the damage probability, and further extends the life of the bearings;
7.No need to clean the water collecting trays: Cancel most of the water collecting trays, reduce the accumulation of running material on the drain trays, reduce the work intensity of manual operation of the machine, and no need to clean the drain trays frequently.
8.The cost of whole machine can be reduced: The tensioning and correcting parts are integrated with the frame to reduce the cost.
9.Avoid the belts bring the water: The belts in the cake discharging position is inclined upward to avoid the belts of vertical machine would carrying water to the discharging position.
10.The whole machine can use PLC for integrated control, or traditional mechanical control.