Prolonged life of belt filter press

      The belt filter press is blocked after running for a period of time

When the washing water needle is blocked, it is the main reason for the poor effect and mud running of the belt filter press.

Solve the flush needle blockage:

(1) Remove the needle cleaning head and remove the slag cleaning brush, and open the rinsing water;

(2), improve the height of the cleaning pump in the clear pool, so as not to pump the sediment at the bottom into the blocking nozzle;

Maintenance of pneumatic deflector valve of filter screen

The compressed air produced by the air compressor contains more oil and water, which is easy to cause water accumulation, air leakage, air pressure reduction of the pneumatic triplet and the phenomenon of the two-position five-way valve of the cylinder not working.

Therefore, the quality of compressed air is the key to the stable operation of sludge filter press.

The solution to this problem is very simple. It can install a gas dryer at the air outlet of the air compressor or a gas filter with a filter element at the inlet of the gas storage tank. It can often discharge water and check the pressure difference of the gas filter to replace the filter element in time.

      Doyen specializes in providing belt press equipment for the Southeast Asian market. Welcome to visit our workshop and formulate a more scientific  plan based on the actual situation of your company. Welcome to visit joyce@doyenchina.com or visit https://www.doyenchina.com.