Several maintenance points of belt filter press

      Several maintenance points of belt filter press:

1. Enough flushing time of the belt filter press should be ensured every day. When the belt filter press is shut down, the inside (filter) and the whole body of the machine should be rinsed to ensure cleanliness and reduce sludge corrosion. Otherwise, it is very difficult to rinse after the accumulated mud is dry, which will affect the use effect and the appearance of the equipment.
2. In accordance with the requirements of the belt filter press operating instructions, frequent observation and machine inspection and maintenance.
3. Always pay attention to adding lubricating oil to the bearings of various parts of the belt filter press to extend the service life of the bearings, and replace them when necessary.
4. Timely discover the sand particles and iron nails in the mud that the belt filter press enters to prevent foreign matter from damaging the filter belt. If the damage is serious, it should be repaired in time to ensure your effect. 
5. The operator should make a good record of the work of the belt filter press, so that the operator can understand the operation of the general equipment during shifts.

dav

      Doyen specializes in providing belt press equipment for the Southeast Asian market. Welcome to visit our workshop and formulate a more scientific  plan based on the actual situation of your company. Welcome to visit joyce@doyenchina.com or visit https://www.doyenchina.com.