How to solve the slow moving of filter plate of belt filter press?

Blog knowledge and your analysis on how to solve the sluggish phenomenon of filter plate of belt filter press:

     Belt filter press finishing release, if you feel good about this article please reprint, by the way to tell your friends! Thank you for your support to Doyen, a professional manufacturer of buried sewage treatment equipment.

     The phenomenon of slow moving of filter plate of belt filter press often occurs, and different solutions have been tried before, but there is no good progress. Today, let Xiaobian share a method with higher efficiency than others. In fact, this method is simple:

     The filter plate of belt filter press moves slowly and even falls off due to too much oil and dirt on the guide rod. It is often only necessary to clean the guide rod in time and apply grease to ensure its lubricity. Of course, it should be noted that it is strictly prohibited to apply thin oil on the guide rod, because the thin oil is easy to fall, making the lower side very slippery, and personnel are prone to fall down during operation and maintenance here, causing personal injury accidents. It is sealed inside. At this time, as long as the system is pumped, it can be solved quickly.

     Doyen specializes in providing belt press equipment for the Southeast Asian market. Welcome to visit our workshop, according to the actual situation of your company, develop a more scientific dehydration program.Welcome to joyce@doyenchina.com or visit https://www.doyenchina.com.