Structural characteristics of belt filter press

      Our series of belt filter press has compact structure, novel style, convenient operation and management, large processing capacity, low water content of filter cake and good effect. Compared with the same type of equipment, it has the following characteristics:

1. The first gravity dewatering section is inclined, and the sludge liquid level is as high as 300mm from the filter cloth, which increases the static head h of the sludge in the gravity dewatering section and improves the gravity dewatering capacity.
2. The first dewatering roller adopts a “T” type drain groove to quickly discharge a large amount of water after pressing, thereby improving the dewatering effect.
3. The gravity dehydration section is long, and the total length of the first and second gravity dehydration section is more than 5m, so that the sludge is fully dehydrated and loses fluidity before pressing. At the same time, the gravity dehydration section is also equipped with special mechanisms such as reversal, through the “wedge”-shaped, “S”-shaped pressing and other functions to make the sludge filter cake obtain a lower water content.
4. Automatic control device for filter belt deviation, etc., filter belt tension and filter belt moving speed can be adjusted freely, easy to operate and manage.
5. Less chemical drugs
6. Low noise and no vibration.

      Doyen specializes in providing belt press equipment for the Southeast Asian market. Welcome to visit our workshop and formulate a more scientific  plan based on the actual situation of your company. Welcome to visit joyce@doyenchina.com or visit https://www.doyenchina.com.